41
Using the WHAM and WHAM x 4 Sub Menus
(Wireless Handheld Access Microphone)
This option lets you set up a WHAM (900MHz — up to 2 mics) or WHAM x 4 (2.4GHz — up
to 4 mics) wireless microphone to operate with the radio. You must first set up a WHAM or
WHAM x 4 microphone before it will work with the radio.
Note:
Refer to your WHAM or WHAM x 4 microphone’s owners manual for more information
about connecting it to the radio.
WHAM units use a control or base unit, external to the radio. WHAM x 4 do not.
A sub unit is another radio on board.
Rotate
PUSH/SELECT
to select
WHAM x 4
or
WHAM
, then press
PUSH/SELECT
to select
it. If you have already connected a WHAM control (base) unit to the radio,
BASE ID
and
LINK
CH
appear. Wen you connect a WHAM unit, a mic icon appears in the lower left of the chan-
nel display screen. If you have not connected a WHAM base unit to the radio,
BASE ID
,
BASE/SUB
,
CHANGE LINK
, and
RENAME
appear.
To set up a WHAM x 4 Base ID, see “Setting a WHAM x 4 Base ID” on Page 41. To set up a
WHAM x 4 base/sub, see “Setting the WHAM x 4 Sub Radio Mode” on Page 41. To set up a
WHAM Base ID, see “Setting a WHAM Base ID”. To set up a WHAM link channel, see
“Changing the Radio Link Channel for a WHAM x 4” on Page 42.
Setting a WHAM x 4 Base ID
The base ID between the radio and the WHAM x 4 microphone you are installing must be the
same.
1. Rotate
PUSH/SELECT
to select
BASE ID
, then press
PUSH/SELECT
to select it.
BASE
ID
and a channel number appear.
2. Rotate
PUSH/SELECT
clockwise to move forward through the displayed numbers or
counterclockwise to move backward. When the desired number appears, press
PUSH/
SELECT
to select it. A confirmation screen appears.
3. If the base ID you set appears correctly, rotate
PUSH/SELECT
to select
YES.
The radio
saves the base ID you input. Otherwise, rotate
PUSH/SELECT
to select
NO
.
Setting the WHAM x 4 Sub Radio Mode
You can set up the radio so connected WHAM x 4 microphones can communicate with each
other.
1. Rotate
PUSH/SELECT
to select
BASE
/
SUB
, then press
PUSH/SELECT
to select it.
BASE RADIO
and
SUB RADIO
appear
.
2. To turn on the sub radio mode, rotate
PUSH/SELECT
to select
SUB RADIO
, then press
PUSH/SELECT
to confirm it. The sub radio mode is turned on.
Otherwise, to turn off the sub radio mode, rotate
PUSH/SELECT
to select
BASE RADIO
,
then press
PUSH/SELECT
to confirm it.
Using the Setup Screen
Summary of Contents for UM625C
Page 1: ...UM 525 MANUAL OWNER S Marine Radio...
Page 60: ......
