39
4. Repeat Step 3 for each of the FIPS code’s numbers. When you have entered all of the
FIPS code numbers, hold down
PUSH/SELECT
. A confirmation screen appears.
5. If the FIPS code you set appears correctly, rotate
PUSH/SELECT
to select
YES.
The radio
saves the FIPS code you input. Otherwise, rotate
PUSH/SELECT
to select
NO
.
Deleting a FIPS Code
1. Rotate
PUSH/SELECT
to select
DELETE
, then press
PUSH/SELECT
to select it.
A screen appears where you can delete the FIPS code.
2. If you want to delete the displayed FIPS code, rotate
PUSH/SELECT
to select
YES
, then
press
PUSH/SELECT
to confirm it. The FIPS code is deleted.
Otherwise, If the displayed FIPS code is not the one you want to delete, rotate
PUSH/
SELECT
to select
NO
, then press
PUSH/SELECT
to confirm it. The FIPS code is not
deleted.
Disabling Auto Channel Switch
This option lets you set the radio so it does not automatically change the channel when it
receives a DSC call. If the radio receives an individual call when Auto Channel Switch is
turned off, the radio replies
UNATTENDED
to the calling radio and does not tune to the
channel requested by the calling radio.
1. Rotate
PUSH/SELECT
to select
AUTO CH SW
, then press
PUSH/SELECT
to select it.
AUTO CH SW
and
ON
and
OFF
appear.
2. To turn off auto channel switch, rotate
PUSH/SELECT
to select
OFF
, then press
PUSH/
SELECT
to confirm it. Auto channel switch is turned off. To turn on auto
channel switch, rotate
PUSH/SELECT
to select
ON
, then press
PUSH/SELECT
to
confirm it. Auto channel switch is turned on.
Position Reply
This option lets you set the radio so you can transmit an acknowledgement automatically or
manually when it receives a Position Request Call.
1. Rotate
PUSH/SELECT
to select
POS REPLY
, then press
PUSH/SELECT
to select it.
AUTO
and
MANUAL
appear.
2. To set the radio to transmit an acknowledgement automatically, rotate
PUSH/SELECT
to
select
AUTO
, then press
PUSH/SELECT
to confirm it. Otherwise, rotate
PUSH/SELECT
to select
MANUAL
, then press
PUSH/SELECT
to confirm it.
Setting Up a Group MMSI
You can program a group MMSI. A group MMSI is 9 digits in length.
1. Rotate
PUSH/SELECT
to select
GROUP MMSI
, then press
PUSH/SELECT
to select it.
2. To enter the first digit of the group MMSI, rotate
PUSH/SELECT
until the digit appears,
then press
PUSH/SELECT
. The digit you entered appears and the cursor moves to the
next position.
Using the Setup Screen
Summary of Contents for UM625C
Page 1: ...UM 525 MANUAL OWNER S Marine Radio...
Page 60: ......
