40
3. Repeat Step 2 for each of the group MMSI's digits. When you have entered each of the
group MMSI's digits, a confirmation screen appears.
4. If the displayed group MMSI is correct, rotate
PUSH/SELECT
to select
YES
, then press
PUSH/SELECT
to confirm it. Otherwise, If the displayed group MMSI is not correct, rotate
PUSH/SELECT
to select NO, then press
PUSH/SELECT
to confirm it. Then repeat Steps 2
and 3 to enter the correct group MMSI.
Setting Channel Scan
You can set the radio so it scans channel you stored in the radio’s memory or all of the radio’s
channels.
1. Rotate
PUSH/SELECT
to select
CHANNEL SCAN
, then press
PUSH/SELECT
to select it.
2. To set the radio to scan channels you saved in the memory, rotate
PUSH/SELECT
to select
MEMORY CHAN
, then press
PUSH/SELECT
to confirm it. Otherwise, rotate
PUSH/
SELECT
to select
ALL CHAN
, then press
PUSH/SELECT
to confirm it.
Setting RX Sensitivity
1. Rotate
PUSH/SELECT
to select
RX SENS
, then press
PUSH/SELECT
to select it.
2. To set the radio to receive distant stations, rotate
PUSH/SELECT
to select
DISTANT
, then
press
PUSH/SELECT
to confirm it. Otherwise, to set the radio to receive nearby stations,
rotate
PUSH/SELECT
to select
LOCAL
, then press
PUSH/SELECT
to confirm it.
Displaying Time and Position
You can adjust the way the radio displays information. You can set it so it displays information
by channel name, local time, or position.
1. Rotate
PUSH/SELECT
to select
DISP TIME/POS
, then press
PUSH/SELECT
to select it.
2. To set the radio to display channel name, rotate
PUSH/SELECT
to select
CHANNEL NAME
,
then press
PUSH/SELECT
to confirm it. Otherwise, to set the radio to display local time,
rotate
PUSH/SELECT
to select
LOCAL TIME
, then press
PUSH/SELECT
to confirm it.
Otherwise, to set the radio to display position, rotate
PUSH/SELECT
to select
POSITION
,
then press
PUSH/SELECT
to confirm it.
Setting the XTRACK Beep Options
You can set the XTRACK feature to sound a tone when you are off course based on your input
GPS data. From the
SETUP
screen, rotate
PUSH/SELECT
until
XTRACK
is highlighted and
press the knob. Highlight either
ON
or
OFF
and push to select it.
Using the Setup Screen
Summary of Contents for UM625C
Page 1: ...UM 525 MANUAL OWNER S Marine Radio...
Page 60: ......
