Fitting Instructions
UH9000S / UH9060S / UH9080S
Page 7 of 12
3.
From the radiator support panel, route the antenna cable
under the front of the battery tray, below the washer bottle
and along the inner quarter panel behind the earth strap
and existing wiring harness.
4.
At the completion of the installation, cable tie the antenna
harness to the existing wiring harness where indicated [ ].
5.
Continue routing the antenna cable along the inner
quarter panel towards the firewall following the existing
wiring harness. Route behind the fuel filter and below the
accessory fuse box and associated wiring.
6.
At the completion of the installation, cable tie the antenna
cable to the existing wiring harness where indicated [ ].
7.
Route the antenna cable from beneath the accessory fuse
box to the firewall grommet as shown.
8.
At the completion of the installation, cable tie the antenna
cable to the existing wiring harness where indicated [ ].
9.
Pass a lead wire through the cut firewall grommet opening
to the passenger’s side footwell.
Attach the antenna cable to the lead wire.