Think of the squelch con-
trol as a gate. If you turn
Squelch fully clockwise it
raises the ‘Squelch gate’
so high that no signals get
through.
If you turn Squelch fully
counter clockwise it low-
ers the ‘Squelch gate’
so low that noise gets
through.
To set the ‘Squelch Gate’
to the desired level, turn
the rotary knob counter-
clockwise until you hear
noise. Then carefully turn
the rotary knob clockwise
until the noise fades. Now
only strong signals get
through.
Monitor
Press and hold
the squelch and receive all weak signals.
Press and hold
again to cancel.
1 - max sensitivity (min squelch)
5 - med sensitivity (med squelch)
9 - min sensitivity (max/tight squelch)
You must select a channel which is not in use before setting the
SQUELCH control. (see page 17 for “Selecting a Channel”).
Operation
16
UNIDEN UH9000
UHF CB Transceiver
NOTE
