Priority Watch
To switch Priority Watch On/Off;
1. Press
6 times
. The Priority Watch setting flashes.
2. Turn the rotary knob or press
/
on the microphone to change the setting
between ON or OFF.
3. Press and hold
to save & exit from the menu mode.
If SCAN is deactivated while it is tuned to an active channel, the UH9000
will stay on that active channel. If none of the channels are active, the
UH9000 will reinstate the scan start channel.
If OS/GS Scanning is initiated when there are no channels programmed
in OS/GS memory, an error tone will be heard and scanning will not start
(see Add/Remove Channels from SCAN Memory, page 23).
Busy Channel Lockout
If the channel is already in use, you can prevent the UHF CB Radio from transmitting .
This is particularly important when using CTCSS/DCS.
1. Press
12 times. The BCL setting flashes.
2. Turn the rotary knob or press
/
on the microphone to change the setting
between ON or OFF.
3. Press and hold
to save & exit from the menu mode.
NOTE
NOTE
Operation
27
UNIDEN UH9000
UHF CB Transceiver
