33
UNIDEN UH9000
UHF CB Transceiver
Search Extra Channel Range and
Programme a RX Channel
UH9000 can search extra channel range (400MHz-520MHz) per 12.5KHz step. Then you
can store the stay frequency to extra channel.
Turn power off
Press and hold
while turning power on (pressing rotary knob).
The channel indicator flashes the lowest available empty channel. You may use the
rotary channel selector to select another channel from CH81 - CH180.
Press and hold
to start scanning. Turn the rotary knob clockwise for ascending
order or counterclockwise for descending order.
If an active frequency channel found, scanning will stop on that frequency. To skip, turn
the rotary knob to continue scanning.
When desired frequency is found, press the rotary knob to move to Alpha tag selection.
A cursor flashes in the first alpha position. Use
or
to shift between cursor
positions. If you do not wish to name the channel then skip this step.
When finished press rotary knob. A long confirmation tone sounds to indicate the new
channel is programmed. The channel flashed to enable selection for programming of
next channel if desired.
Press
[PTT]
on the microphone to exit programming mode.
Operation - Special Features
