BELT CLIP
LOW BATTERY ALERT
BACK LIGHT
To attach the belt clip:
To remove the belt clip:
Slide the belt clip until it snaps into place.
To remove the belt clip, press and hold
belt clip locker, slide the belt clip at the
same time until released.
If the battery level becomes low, the battery indicator
icon on the display begins flashing. When the batteries
in the unit are low, the unit will go into a battery Low
mode. The Transmit mode is disabled. Replace the
alkaline batteries immediately or if you are using the
NiMH battery pack, place the radio on the charge
cradle to recharge. Full charge will take up to 16 Hrs.
The uh064sx has an automatic display back light which remains on for 10
seconds after a key press (all keys except PTT key). The back light will work
even if the keypad is locked but will not work during low battery alert mode.
(4)
Summary of Contents for UH088SX
