Uniden UH088SX Owner'S Manual Download

Page: 8 / 40

The Uniden uh088sx is designed to provide you with years of trouble free service. It's rugged components and

materials are capable of withstanding harsh environments.

We are certain that you will enjoy your uh088sx. Please read this operating Manual carefully to ensure you gain the

optimum performance of the unit.

Transmit & Receive FM 40CH (UHF - CB, TX Power 5w)

7 Segments LCD

CTCSS function

Tone Squelch (Selcall) Capability

Duplex Capability (from CH01 - CH08 per channel)

Open Scan/Group Scan

Variable Squelch Level adjust

Volume Control with power ON/Off Switch

Features

Preventative Maintenance

Troubleshooting

Memory Backup

The following system checks should be made every six to twelve months:

Check the standing Wave Ratio (SWR)

Inspect the tightness of all electrical connections.

Inspect the antenna coaxial cable for wear or breaks on the shielding.

Inspect the tightness of all screws and all other mounting hardware.

Should the unit malfunction or perform poorly, follow these procedures:

Check the power cord and fuse.

Check the VOLUME control setting. Be sure the SQUELCH is adjusted properly. Possibly the radio is

over squelched.

Check that the transmission line (coaxial cable) is securely connected to the ANTENNA connector.

Check that the antenna is fully extended for proper operation.

Check that all transmission line (coaxial cable) connections are secure and free of corrosion.

A built in EEPROM protects the channels stored in the uh088sx memory after the DC power cable is

disconnected

If there is trouble with receiving...

If there is trouble with transmitting...

UNIDEN UHF CB Transceiver

Introduction

Summary of Contents for UH088SX









































Search results

Summary of Contents for UH088SX

Reviews:

Related manuals for UH088SX

Brands by name

Popular brands

Uniden UH088SX, Owner'S Manual

Search results

Summary of Contents for UH088SX

Reviews:

Related manuals for UH088SX

Brands by name

Popular brands