UNIDEN Model uh044sx UHF CB Radio
BUSY CHANNEL LOCKOUT
BCL is used when CTCSS or DCS is selected to prevent
transmission when the uh044sx detects a transmission
from another unit using the same CTCSS or DCS code.
1. Press nine times. The current BCL
setting flashes.
2. Press , to select desired setting.
3. Press and hold to save and exit.
ROGER BEEP
Roger Beep is a BEEP that is sent to notify the end of
transmission (both PTT and VOX transmission.) Roger
Beep can be heard through the speaker when Key Beep
is on. Roger Beep is transmitted even if Key Beep is
turned off.
However, Roger Beep will not be heard from the speaker.
1. Press ten times. The current Roger Beep setting
flashes.
2. Press , to select desired setting.
3. Press and hold to save and exit.
KEY BEEP
Assures the user that the keypad has been properly pressed by
emitting a beep tone. This tone can be switched on or off.
1. Press eleven times. bP setting flashes.
2. Press or to change selection.
3. Press and hold to save and exit.
22
ENTER
MENU
ENTER
MENU
ENTER
MENU
ENTER
MENU
OPERATION
ENTER
MENU
