background image

UNIDEN Model uh044sx UHF CB Radio

12

OPERATION

SELECTING A CHANNEL

Press       or       to select the desired 
channel.

If you press and hold the        
      or        channel numbers 
will scroll rapidly.

TO TRANSMIT AND RECEIVE

The uh044sx uses the 40 UHF-CB Channels. For your reference 
a list of the available channels and corresponding frequencies is 
printed on page 25. (Channels 22 and 23 are for telemetry and 
telecommand applications. Transmit  is inhibited on these 
channels).

1.  The maximum RF transmit power 

of uh044sx

 

is 2 Watts.

2.  Before you transmit, listen for 

activity on the selected channel.

3.  When the channel is clear, press 

and hold the       to transmit.       
 

TX 

 appears on the LCD.

Hold the radio with microphone approximately 5 cm in front of 
your mouth with the antenna at approximately 45° angle away 
from your head. Speak in a clear, normal conversational voice.

4.  When you have finished 

speaking, release the        and 
listen for a response  then 

TX

 

disappears on the LCD.

BUSY

 appears while receiving a signal.

MEM

DUAL

ENTER

TX

PWR

CALL

SCAN

MENU

MEM

DUAL

ENTER

TX

PWR

CALL

SCAN

MENU

Summary of Contents for UH044SX





























Reviews: