26
1. From the
reCorder SetuP
screen, use VoL+
and
VoL- to select
SetuP MASKinG AreA
; press m
to enter. The
SetuP MASKinG AreA
screen displays:
2. Use Ch+
and
Ch-
to select a camera (1 - 4) for setting up the masking area. Press m to enter the
camera masking preview page.
3. A grid displays over the image on the screen. While in masking preview, use Ch+
,
Ch-, VoL+
,
and
VoL- to select the masking block(s) where motion is to be ignored. Press m to confirm
each selection. You can also press m again to unmask a block.
4. Press esC to save the entire mask and return to the previous screen. Mask other cameras as
needed.
record time
Use
reCord tiMe
to set a specific length of time for motion recording. Options are 2, 5, or 10
minutes.
