20
3. Quickly (within 30 seconds) press the PaIrInG key on the camera cable. The green Pair LED on
the selected camera blinks once, pauses, and then stays on to indicate that data transmission is
in progress.
PAired
displays on the screen if pairing is successful or
PAirinG FAil
if it isn’t. If Pairing fails,
repeat these steps. If Pairing fails again, move the camera and monitor closer together and
repeat.
Press esC to back out and return to the main menu or press VoL+
or
VoL- to select another
camera to pair.
Image Brightness
1. With the
SetuP detAil oPtionS
screen displayed for a camera, press Ch+ to highlight the
Brightness selection.
2. Press VoL+
or
VoL- to adjust the camera’s brightness; the five levels are OFF, 1 - 4. The default
level is 2.
3. Press m to accept the new setting and return to the
SetuP detAil oPtionS
screen. Select
another camera if needed.
