Uniden UBCD396T, Owner'S Manual

Page: 64 / 140

Programming Radio Systems
63
Enter a talk group ID
You can enter I-Calls by pressing then the
I-Call number. You can enter the I-Call wild card by
pressing then .
Refer to the appropriate section to change a
channel setting:
• See “Adjusting the P25 Level (Motorola and
Conventional Systems Only)” on Page 79
• See “Editing the Channel Name” on Page 84
• See “Editing the Talk Group ID (Trunked Channels
Only)” on Page 86
• See “Setting Channel Lockout” on Page 89
• See “Deleting Channels” on Page 90
• See “Copying/Pasting Channels” on Page 90
To program another channel within the same group,
press , then repeat the above. To create another
channel group and enter more channels, press
three times, then proceed from “Entering/Editing
Motorola Channel Groups” on Page 62.
Next, rotate the scroll control to select the type of
EDACS system you want to program, then briefly
press the scroll control to select it.
•
- Use for wideband EDACS systems
• - Use for narrowband EDACS systems
• - Use for EDACS SCAT (Single Channel
Autonomous Trunking)
The scanner creates an empty EDACS system, with a
default name of .
Note:
0
Programming EDACS Systems
Program System
New System
EDCS
Confirm? Yes=”E” / No=”.”
WIDE
NARROW
SCAT
Confirm? Yes=”E” / No=”.”
System n E