Uniden TRU 8880 Series, Owner'S Manual, Page: 67 / 100

T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 6 5 ]
w w w . u n i d e n . c o m
Screening a call
From the base
To screen an incoming call, do the steps as follows:
1) After the answering system answers, the base speaker will let you
hear the calls as the machine records the message. To adjust the
volume, press
/volume/ or /volume/ . If you set the
answering system to off, you cannot screen a call.
To mute the Call Screen, press play/stop when the system is
answering.
2) To answer the call, press speaker or pick up the handset from the base (when
AutoTalk is set to on). The answering system will disconnect automatically.
From the handset
1) Press the SCREEN soft key when the system is answering.
To mute the Call Screen, press the MUTE soft key when the system is answering.
2) To answer the call, press talk/flash , speaker or any number key,
*
/tone/
←
, or
#/
→
(when Any Key Answer is set to on).
To cancel the call screen, press end . The answering system will disconnect
automatically.
•If you set the call
screen to off, you can
not screen a call.
•If you press talk/
flash , call screen will
be cancelled and the
handset is put in talk
mode.
•If you press the SCREEN
soft key while another
handset is screening a
call, you will hear a
beep and you can not
screen a call.
note
TH
E IN
TE
G
R
A
T
ED
AN
S
W
E
R
I
N
G DE
VI
CE
TRU8880_1st.book 65 ページ ２００４年１月７日 水曜日 午後６時３０分