Uniden TRU 8880 Series, Owner'S Manual, Page: 13 / 100

G E T T I N G S T A R T E D [ 1 1 ]
w w w . u n i d e n . c o m
C. Connect the base unit
1) Connect the AC adapter to the DC IN 9V jack and to
a standard 120V AC wall outlet.
Connect the AC adapter to a continuous power supply
(i.e., an outlet that is not controlled by a switch).
2) Set the base on a desk or tabletop, and place the
handset in the base unit.
Place the base unit close to the AC outlet so that you
can unplug the AC adapter easily.
3) Make sure that the charge LED illuminates.
If the LED does not illuminate, check to see that the
AC adapter is plugged in and the handset makes good
contact with the base charging contacts.
4) After installing the battery pack in handset, charge
your handset for least 15-20 hours before plugging
into the phone line.
5) Once the handset battery pack is fully charged,
connect the telephone line cord to the TEL LINE jack
and to a telephone outlet.
If your telephone outlet isn't modular,
contact your telephone company for
assistance.
• Use only the supplied
[AD-830] AC adapter.
Do not use any other
AC adapter.
•Place the power cord
so that it does not
create a trip hazard or
where it could become
chafed and create a
fire or electrical
hazard.
note
G
E
TTIN
G
S
T
AR
TE
D
TRU8880_1st.book 11 ページ ２００４年１月７日 水曜日 午後６時３０分