Uniden TRU 8880 Series, Owner'S Manual, Page: 56 / 100

[ 5 4 ] C A L L E R I D
w w w . u n i d e n . c o m
Talk mode
1) During talk mode press cid to review Caller ID message.
2) Select the Caller ID message you want to dial (see "Viewing the Caller ID List" on
page 51).
3) When the Caller ID number is located, press the
DIAL
soft key, and the number
will be dialed.
Storing Caller ID messages in the Phonebook
Messages shown in the Caller ID list can be stored in the phonebook. The phone
number and name of the party on the Caller ID list can be stored in memory.
1) When the phone is in standby mode, select the Caller ID message to be stored.
Then press the
STORE
soft key.
Sto re/ Edi t Na me
appears. If the Caller ID message
is already stored in memory, you will hear a beep and
T his da ta is alre ady
stor ed! !
appears. The number will not be stored.
2) To complete the setting, follow the steps 4-8 in "Phonebook (Storing Phone
Numbers, Names, Distinctive Rings, and Speed dial)" on page 43.
•When a long distance call
has been set, "
1
" appears
in the display.
•If a call comes in via a
telephone system that
does not offer Caller ID
service, no information is
stored.
•If the Caller ID message
was received as a private/
unknown number, or the
message does not have
the number, you cannot
store the message in the
Phonebook. If it was
received as private/
unknown name, the
message will be stored as
<No Name>.
•Even if the 100 memory
locations are full, the
message will be stored in
the Phonebook. However,
the message will be erased
from the Caller ID list.
note
CA
LLE
R I
D
TRU8880_1st.book 54 ページ ２００４年１月７日 水曜日 午後６時３０分