Page 80
•
- Charge roads are pay roads where you can purchase a pass
or vignette to use the road for a longer period of time. They can be enabled or
disabled separately from toll roads.
•
- You might need to avoid motorways when you are driving a
slow car or you are towing another vehicle.
•
- The software excludes unpaved roads by default: unpaved
roads can be in a bad condition and usually you cannot reach the speed limit on
them.
•
- The software includes ferries in a planned route by default.
However, a map does not necessarily contain information about the accessibility
of temporary ferries. You might also need to pay a fare on ferries.
•
- The software includes toll roads (pay roads where there is a
per-use charge) in the routes by default. If you disable toll roads, your software
plans the best toll-free route.
5. Tap
to confirm the changes. The software recalculates the route.
The orange line line now shows the new recommended route.
3.5 Adding the destination of the route to Favourites
You can add the destination of the active route to Favourites, the list of frequently
used destinations. Planning a route to one of the Favourite destinations is
described on page 66.
1. If you are on the Map screen, tap
to return to the Navigation menu.
2. In the Navigation menu, tap
. The active route is displayed it in its full
length on the map together with additional information and controls.
Summary of Contents for TRAX5000
Page 1: ...TRAX5000 In Car Navigation...
Page 111: ...Page 111 Notes...
