Scan Mode Operation
You can save channels into memory and then use Scan mode to monitor
those channels from lowest to highest. If the radio detects a signal on a
channel, it stays on that channel as long as the signal is received; when the
signal stops, the radio continues scanning.
11
10
08
13
12
14
17
15
The radio scans about
5 channels in 0.5 seconds.
When it detects a signal, the radio stays
on the channel until you press the
Channel Up
button or the signal stops.
Resume
scan
•
To activate Scan mode, press SCAN/MEM.
•
You must have at least two channels in memory to start a scan. However,
you cannot save marine channel 70 or Weather channels.
•
You cannot transmit while in Scan mode.
•
To save a channel into memory, select the channel, then press and hold
SCAN/MEM. The MEM icon displays whenever you tune to that channel.
•
To remove a channel from memory, set the radio to that channel, then
press and hold SCAN/MEM. The MEM icon no longer displays.
•
When the radio stays on a channel, press Channel Up to leave that
channel and resume scanning.
•
To end the scan, press the SCAN/MEM button again; the radio remains on
the last scanned channel.
How it Works?
Using the radio in Scan Mode
14
Handheld VHF Marine Transceiver
UNIDEN MHS115
