93
There are four record types: regular, motion detection (MD), Alarm, MD &
alarm.
Alarm output
: when an alarm occurs, system enables peripheral alarm
devices.
Latch
: when motion detection complete, system auto delays detecting for a
specified time. The value ranges from 1-300(Unit: second)
Show message
: System can pop up a message to alarm you in the local host
screen if you enabled this function.
Alarm upload
: System can upload the alarm signal to the network (including
alarm centre) if you enabled current function.
Send email
: System can send out email to alert you when an alarm occurs.
Record channel
: System auto activates motion detection channel(s) to record
once an alarm occurs. Please make sure you have set MD record in Schedule
interface(Main Menu->Setting->Schedule) and schedule record in manual
record interface(Main Menu->Advanced->Manual Record)
PTZ activation
: Here you can set PTZ movement when an alarm occurs.
Such as go to preset, tour &pattern when there is an alarm. Click “select”
button, you can see an interface is shown as in Figure 4-97X.
Record Delay
: System can delay the record for specified time after alarm
ended. The value ranges from 10s to 300s.
Tour
: Here you can enable tour function when alarm occurs. System one-
window tour.
Snapshot
: You can enable this function to snapshoot image when a motion
detect alarm occurs.
Buzzer
: Highlight the icon to enable this function. The buzzer beeps when
alarm occurs.
Test
: Click it to test current motion detect setup (do not need to save). Click
Select button after Region, you can set motion detect area.
Please highlight icon to select the corresponding function. After all the
setups please click save button, system goes back to the previous menu.
Note: In motion detection mode, you can not use copy/paste to set channel setup since the
video in each channel may not be the same. Motion detect only has relationship with the
sensitivity and region setup. It has no relationship with other setups.
