83
Please enable the SNMP function. Use the corresponding software tool (MIB
Builder and MG-SOFT MIB Browser. You still need two MIB file: BASE-SNMP-
MIB, NVR-SNMP-MIB) to connect to the device. You can get the device
corresponding configuration information after successfully connection.
Please follow the steps listed below to configure.
Check the box to enable the SNMP function. Input the IP address of the PC
than is running the software in the Trap address. You can use default setup for
the rest items.
Compile the above mentioned two MIB file via the software MIB Builder.
Run MG-SOFT MIB Browser to load the file from the previous step to the
software.
Input the device IP you want to manage in the MG-SOFT MIB Browser.
Please set the corresponding version for your future reference.
Open the tree list on the MG-SOFT MIB Browser; you can get the device
configuration. Here you can see the device has how many video channels,
audio channels, application version and etc.
Note: Port conflict occurs when SNMP port and TCP port are the same.
