63
Channel
: Select a channel from the dropdown list.
Saturation: It is to adjust monitor window saturation. The value ranges from
0 to 100. The default value is 50. The larger the number, the strong the color
is. This value has no effect on the general brightness of the whole video. The
video color may become too strong if the value is too high. For the grey part of
the video, the distortion may occur if the white balance is not accurate. Please
note the video may not be attractive if the value is too low. The recommended
value ranges from 40 to 60.
Brightness
: It is to adjust monitor window bright. The value ranges from 0 to
100. The default value is 50. The larger the number is, the bright the video is.
When you input the value here, the bright section and the dark section of the
video will be adjusted accordingly. You can use this function when the whole
video is too dark or too bright. Please note the video may become hazy if the
value is too high. The recommended value ranges from 40 to 60.
Contrast
: It is to adjust monitor window contrast. The value ranges from 0 to
100. The default value is 50. The larger the number is, the higher the contrast
is. You can use this function when the whole video bright is OK but the
contrast is not proper. Please note the video may become hazy if the value is
too low. If this value is too high, the dark section may lack brightness while the
bright section may over exposure .The recommended value ranges from 40 to
60.
Sharpness
: The value here is to adjust the edge of the video. The value
ranges from 0 to 100. The larger the value is, the clear the edge is and vice
versa. Please note there is noise if the value here is too high. The default
value is 50 and the recommended value ranges from 40 to 60.
Mirror
: It is to switch video up and bottom limit. This function is disabled by
default.
Flip
: It is to switch video left and right limit. This function is disabled by default.
BLC
: It includes several options: BLC/WDR/HLC/OFF.
•
BLC: The device auto exposures according to the environments situation
so that the darkest area of the video is cleared
•
WDR: For the WDR scene, this function can lower the high bright section
and enhance the brightness of the low bright section. So that you can view
these two sections clearly at the same time. The value ranges from 1 to
100. When you switch the camera from no-WDR mode to the WDR mode,
system may lose several seconds record video.
•
HLC: After you enabled HLC function, the device can lower the brightness
of the brightest section according to the HLC control level. It can reduce the
area of the halo and lower the brightness of the whole video.
