Extending the Base Unit Legs
For better visibility of the buttons and LEDs, you can extend the legs on the
bottom of the Base Unit,
placing it at an angle (See
the Base Unit foldout
illustration). To use the
Handset in the charging
cradle while the Base Unit is
set at an angle:
1. Remove the Handset
Support by pressing
upward on the notch at
the front of the support.
2. Store the Handset
Support on the bottom
of the Base Unit by
snapping the support
into the slots under the
charging cradle.
The Handset will now remain in a stable, upright position with the Base Unit set
at an angle. Or, you can place the Handset in the face down position
Mounting the Base Unit on a Wall
Installing the Wall-Mount
Adapter on the Base Unit
1. Remove the Handset
from the Base Unit.
2. Lay the Base Unit face
down on a flat, smooth
surface.
3. Insert the two front tabs
of the Wall Mount
Adapter into the two
receptacles next to the
legs of the Base Unit.
4. Squeeze the two side
tabs of the Wall Mount
Adapter and snap them
into the receptacles
near the bottom edge of
the Base Unit.
9
