EXP 9200 Features
UltraClear Plus noise reduction provides the quality sound of a corded
telephone.
Spread Spectrum Technology
Tone/Pulse Dialing
20-Number Memory
Maximum Operating Range
2-Line Operation (Separate Ring Tones)
Dual Keypads
One-Touch Memory Dialing Buttons
Room Monitoring
Handset Monitor
3-Way Conferencing
2-Way Paging/Intercom
Redial/Pause and Flash
AutoStandby
AutoTalk
Auto Channel Scan
Automatic Digital Code Security
Speaker Phone
Handset Volume Control/Ringer Volume Control
Base Unit Ringer Volume Control
Spare Battery Charger
Battery Back-Up
Battery Saving Feature
2-Way Handset Mounting
Reversible Handset Retainer
Automatic Digital Code Security
Many cordless telephones operate similarly and on the same frequency.
Without digital code security, another Handset could make calls using your
Base Unit and telephone line. Therefore, to avoid any unauthorized calls
through your Base Unit, a Digital Code feature was added to your EXP 9200.
This Digital Code is shared only between the Handset and Base Unit. The
Code is set
automatically when you first use the phone.
To reset the Digital Code:
1. Be sure the Handset is on the Base Unit.
2. Press INT’COM on the Base Unit. The Base Unit and Handset will begin
beeping.
3. Remove the Handset from the Base Unit and set it down again. The Base
Unit and Handset will stop beeping.
5