Setting the Handset Retainer
1. Remove the Handset Retainer on the Base Unit by sliding it upward.
2. Flip the Retainer over so the tab is facing up.
3. Slide the Retainer back into the Base Unit.
The Base Unit of your EXP 9200 is now ready to be mounted on a standard
wall plate or mounted directly to a wall.
Mounting on a Standard Wall Plate
1. Plug one end of the
Telephone Line Cord(s)
(supplied) into the “TEL LINE”
jack(s) on the top of the
Base Unit. Lay the cord(s)
inside the molded channel
on the bottom of the Wall
Mount Adapter connected to
the Base Unit.
2. Plug the other end of the
Telephone Line Cord(s) into
the telephone wall jack(s).
3. Plug the AC Adapter cord
into the AC Adapter input
jack on the Base Unit.
Note:
Use only the AC
Adapter supplied with
the EXP 9200.
Place the cord(s) inside the molded channel on the Wall Mount Adapter
connected to the Base Unit.
4. Place the Base Unit on the two posts of the wall plate and slide downward
to secure. Then hang the Handset on the Base Unit.
To DC IN12 V
Input Jack
AC
ADAPTER
To TEL LINE
Jacks
To Telephone
Wall Jack
AT&T or GTE
Wall Plate
LINE 2
TELEPHONE JACK
10
