Uniden DXI5586-2 - DXI Cordless Phone, Owner'S Manual

Page: 13 / 48

INST
ALLING THE
PHONE
I N S T A L L I N G T H E P H O N E [ 13 ] www.uniden.com
Headset Installation
Your phone may be used with an optional headset. To use this feature,
insert the headset plug into the headset jack.
Your phone is ready for hands-free conversations.
(Headsets may be purchased by visiting our website at www.uniden.com
or by calling our Parts Department. See page 35.)
Register Handsets to the Main Base before Using!
Whichever handset you choose to charge in the main base will automatically register
to the main base.
The second handset (charging in the extra charging cradle) MUST also be registered
to the main base before use. Follow the steps below to register the second handset.
1) Be sure both handsets are fully charged.
2) Remove the handset from the charging cradle, and place it in the main base. The
charge/in use LED light on the main base will begin to flash, indicating that the
registration is taking place.
3) Wait for at least 5 seconds, then remove the handset from the main base.
4) Press the find hs key on the main base. If both handsets beep, registration is
complete. If one handset does not beep, re-register that handset.
5) Once both handsets are registered, it doesn’t matter which handset is placed in
the main base or the charging cradle.
• When you charge the
handsets, Caller ID
summary screen and
the name of the
handset,
HS1 appears.
If HS2 appears, you
are charging the
handset No. 2.
• The charging cradle
can be used to charge
either handset.