Uniden DX8200, Operating Manual

Page: 31 / 54

31
SETTING UP YOUR PHONE
SETTING
UP
YOUR
PHONE
SETTING THE PULSE-TONE SWITCH (Australian Model only)
Be sure the pulse-tone switch is in the tone
position.
ADJUSTING RINGER VOLUME CONTROLS
• To adjust the ringer volume of your Base Unit,
set the ring vol switch to the desired position.
CLEANING THE BATTERY CONTACTS
To maintain a good charge, it is important to
clean all charging contacts on the Handset and
Base Unit about once a month. Use a pencil
eraser or other contact cleaner.
Do Not use any liquids or solvents.
NOTE: Most phone systems are Tone Dialing. Check with your local phone company if you
are not sure whether your system is Tone or Pulse dialing. The New Zealand model
is a Tone only telephone and the Pulse/Tone switch has been disabled.
8200-OM.qxd 22/10/98 15:44 Page 31