Uniden DX8200, Operating Manual

Page: 35 / 54

35
PROGRAMMING YOUR DX8200
PROGRAMMING
STORING MEMORY DIAL NUMBERS
Numbers can be stored for use by the Base Unit and Handset separately. There
are 10 memory locations for the Base Unit and 10 memory locations for the
Handset. This feature allows you to place two separate memory calls, one for
each active line, at the same.
Entering Base Unit Memory Numbers
For example, to store the number 9599-3355 in the Base Unit memory:
1. Press on the Base Unit.
2. The
speaker
LED flashes .
NOTE: Numbers stored with the Handset cannot be accessed by the Base Unit. Numbers
stored with the Base Unit cannot be accessed by the Handset. The programming
procedure will be cancelled if more than 20 seconds elapsed between each keystroke
entry or step.
8200-OM.qxd 22/10/98 15:44 Page 35