Uniden DSS 2475, Quick Start Manual, Page: 70 / 76

[ 64 ]
Symptom Suggestion
The handset or the base doesn ’ t • Charge the batteries in the handset for 17-20 hours by placing the handset
ring or can ’ t receive an on the base or charging cradle.
intercom call. • The handset may be too far away from the base unit.
• Place the base unit away from appliances or metal objects.
• Remove the base ID (see “ Deregister the Base Setting ” on page 22) and
register the handset to the base (see “ Register the Handset ” on page 56).
• If more than 3 handsets are in use, you may not be able to page.
“
Unavailable
” appears in • Make sure that another handsets or the base is not in use, and try the
the display. phone again.
• Make sure that you are not too far from the base.
Severe noise interference. • Keep the handset away from microwave ovens, computers, remote control
toys, wireless microphones, alarm systems, intercoms, room monitors,
fluorescent lights, and electrical appliances.
• Move to another location or turn off the source of interference.
The Caller ID does not display. • The handset was picked up before the second ring.
• The call was placed through a switchboard.
• Call your local telephone company to verify your Caller ID service is current.
You cannot register the • Please make sure your batteries are charged at least 10 minutes
handset at the base. (see “ Register the Handset ” on page 56).
• Remove the base ID (see “ Deregister the Base Setting ” on page 22) and
register the handset to the base (see “ Register the Handset ” on page 56).
• Only 4 handsets can be registered to the base.
The handset doesn ’ t communicate • Remove the base ID (see “ Deregister the Base Setting ” on page 22) and
with the base or other handsets. register the handset to the base (see “ Register the Handset ” on page 56).
• Make sure that you have registered all handsets.
UP308BH (DSS2465) ENG OM 12/28/04 8:27 AM Page 64