Uniden DSS 2475, Quick Start Manual, Page: 29 / 76

[ 23 ]
BASICS
On the handset, you may also use the speakerphone while talking to an outside call.
Using the handset speakerphone is called
“ hands-free conversation ” . This feature allows
you to easily communicate while performing other tasks, such as cooking.
appears on the handset display during hands-free conversations.
You can easily switch a call from normal conversation to “ hands-free conversation ” . To
switch a call, press during the call.
MAKING AND RECEIVING CALLS
• To set “ Auto talk ” , see
page 17 or “ Anykey
Answer ” , see page 18.
• The handset
microphone is located
at the bottom of the
handset (see
“ Controls
and Functions ” on
page 1). Position
yourself as near to the
handset as possible
and speak clearly.
• If the line is in use by
another handset(s),
“
Line In Use
”
appears in all
registered handset
’ s
display, that are not
in use.
• The base microphone
is located under the
base. Position
yourself as near to the
base as possible and
speak clearly.
From the Handset From the Base
Normal conversation Hands-free conversation
To answer a call Handset On the Cradle Press (talk).
Pick up the handset (AutoTalk)
or pick up the handset and
press .
Handset Off the Cradle Handset Off the Cradle
Press any number key, , Press .
or (Anykey Answer),
or press .
To make a call
Handset Off the Cradle Handset Off the Cradle
1) Press . 1) Press . 1) Press (talk).
2) Listen for the dial tone. 2) Listen for the dial tone. 2) Listen for the dial tone.
3) Dial the number. 3) Dial the number. 3) Dial the number.
OR OR
Dial the number, then Dial the number, then
press . press .
To hang up Press , or return the handset to the cradle (Auto Standby). Press (talk).
To enter a pause When you dial the number in the standby mode, Press (talk).
within the press the
PAUSE
soft key. When you dial the number,
dialing sequence “
P
” appears in the display, which represents a pause. press .
UP308BH (DSS2465) ENG OM 12/28/04 8:23 AM Page 23