Uniden DSS 2475, Quick Start Manual, Page: 38 / 76

[ 32 ]
If you make a mistake while entering a name
Use or to move the cursor to the incorrect character.
Press the DELETE soft key to erase the wrong character, then enter the correct
character. To delete all characters, press and hold the DELETE soft key.
For example, to enter
Movies
:
1) When the phone is in the standby mode, recall the “ Phonebook ” menu by
following steps 1-2 in “ Storing Phone Numbers, Names, Distinctive Rings, and
Speed Dial ” on page 29.
2) Press the
STORE
soft key, “
Store/Edit Name
” appears.
3) Press 6 once to select “
M
” , then press to move the cursor to the right.
4) Press 6 six times to select “
o
” .
5) Press 8 six times to select “
v
” .
6) Press 4 six times to select “
i
” .
7) Press 3 five times to select “
e
” .
8) Press 7 eight times to select “
s
” .
9) When finished, press the OK soft key.
To continue to store the telephone number, proceed to step 6 on page 30.
If the next character
uses the same number
key, you must press
to move the
cursor over. Otherwise
the next time you
press the number key,
it changes the
character that was
previously set.
UP308BH (DSS2465) ENG OM 12/28/04 8:24 AM Page 32