Uniden DECT160 Owner'S Manual Download | Manualshive

Page: 6 / 56

background image

[5]

Preparing the handsets

Installing and charging the handset battery pack

1

On each handset:

Remove the battery compartment cover.
Press down on the semi-circle indent and slide
the cover off.
Connect the supplied battery pack with the
correct polarity.
Slide the battery cover back until it clicks
securely into place.

2 To charge the battery, place the handset(s) on

the base or on a charger. The charging light in
the base illuminates. While charging, the
symbol

scrolls and when the handset is fully

charged, all the bars of the battery symbol will
be filled when the phone is off the cradle.
If the charging light does not come on, reposition
the handset in the base or charger, ensuring that
the charging points contact. You must charge
each handset for 15-20 hours before use.

NOTE: Once your handset is fully charged, your

phone is designed for the base charge
LED to turn off for approximately 4
seconds during the following instances:

1) just after reaching a full charge
2) 1 minute after reaching a full charge
3) every 5 minutes after reaching a full charge

To alleviate the charge LED from blinking on the
base, you can simply remove the handset from
the charging cradle.

You may also select to leave the handset in the
cradle, which will not damage the unit. Once fully
charged, you may notice the charge LED light will
turn for 4 seconds every 5 minutes. This is normal
operation and does not mean your unit is
defective.

WARNING

Under no circumstances should non-
rechargeable batteries be used. Only use the
supplied battery pack or you will invalidate your
guarantee and may damage the telephone.

UC504DH(DECT160-2) OM 9/7/06 5:46 PM Page 5

«
...
4
5
6
7
8
...
»

Summary of Contents for DECT160

























































Reviews:

No comments

Related manuals for DECT160

Brand: AT&T Pages: 116

Brand: Panasonic Pages: 5

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 24

Brand: Panasonic Pages: 42

Brand: Panasonic Pages: 135

Brand: Radio Shack Pages: 20

BUTLER 2551 Deluxe

Brand: Topcom Pages: 52

Brand: Alcatel Pages: 2

Brand: switel Pages: 120

Brand: Swisscom Pages: 110

Brand: Moshi Pages: 7

ASY-12747-002 - RIM HS-655+ Bluetooth Headset

Brand: Blackberry Pages: 15

Brand: Daewoo International Pages: 26

Brand: Emerson Pages: 2

Brand: Emerson Pages: 2

Brand: Emerson Pages: 1

Brand: Emerson Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands