background image

[39]

You can now choose from the AM settings menu
as follows.

Answer On/Off

To set the Answering Machine On or Off, use
or

to select 

Answer On/Off

. Press

.

Select the desired On or Off option and
press

.

Play/Delete/Record OGM

You may record and edit 2 personal OGMs
(Out Going Messages). OGM 1 and OGM 2.

There is also a pre-recorded OGM for your
selection.

To play/delete or record an OGM, use

or

to select 

Play OGM

Delete OGM

or 

Record OGM

.

Press .

Select the desired option and press

.

If recording an OGM, record will begin after the
confirmation tone.

Select OGM

To select an OGM, use

or

to select

Select OGM

. Press

.

Setting Call Screen

Incoming messages can be screened (played
through the base speaker) by setting this feature
on.

Use

or

to select 

Call Screen

.

Press

.

Select the desired On or Off option and
press

.

Using Call Screen

With Call Screen On, during OGM play and
incoming message record the handset will show

CallScreen=OK

.

If

is pressed the call is screened through the

handset speakerphone.

The call can be answered at any time by pressing

or

on the handset.

This function is only available with one handset at
a time.

UC504DH(DECT160-2) OM  9/7/06  5:50 PM  Page 39

Summary of Contents for DECT160

























































Reviews: