background image

Using the phonebook

You can store your 100 frequently used names
and numbers in the phonebook for easy dialing.
Press

to exit the phonebook menu and

return to standby at any time.

Store a phonebook name/number

Phonebook entries are stored alphabetically.

1 Press

.

2 Press

.

3 Press

or

to select 

New Entry

Press

<Enter Name>

appears.

4  Enter name using the keypad, then press

.

Stored names can be up to 13 letters long.
Press

to delete an incorrect letter.

Entering names

For example, to enter the name JOHN:

For 

J

, press 

once.

For 

O

press three times.

For 

H

, press 

twice.

For 

N

, press 

twice.

If you enter a letter and the next letter is on the 
same button, press

to move the cursor to

the right before trying to enter the next letter.

To switch between upper and lower case,
press

.

<Enter Number>

is displayed. Enter the 

number. Press

.

To enter a pause, press and hold 

.

You will see an 

R

appear in the display first.

Continue holding

until you see a 

P

for

pause appear in the display.

Stored numbers can be up to 24 digits long.

Press

to delete an incorrect digit.

Press

to confirm the number.

6  Press

or

to select a tone type and

press

7 Press

or

to select 

Save

or 

Go Back

and press

.

8  The phonebook entry is now stored.

Press

to return to standby.

[17]

UC504DH(DECT160-2) OM  9/7/06  5:47 PM  Page 17

Summary of Contents for DECT160

























































Reviews: