15
usIng speCIal Features
power Failure Back up system
The charged handset temporarily supplies power to the base unit, when a
power failure occurs (power failure mode). You can then make and receive
calls using a handset. None of the keys on the base unit are functional
during the power failure mode.
When a power failure occurs place the charged handset on the base, the
handset LCD backlight is illuminated for 10 secs and “
Supplying power
Handset >> Base
” is displayed on the LCD.
After 3 seconds, the message “Please don’t pick up the handset” is
displayed on the LCD.
If the handset is lifted from the base during the power back up mode, the
message “
Please put on the base cradle
” is displayed on the LCD.
If the battery level is low, the unit will not work efficently during the power
back-up mode. In addition, in case the handset battery power runs out, we
recommend connecting a corded-type telephone to the same telephone
line.
Making Calls
To make a call during the power failure mode, follow the steps given below:
When more than one handset is registered:
•
You should leave one handset on the base unit for supplying the power,
and use another handset for making calls. Please refer to the “Using
your Phone’ section on page 13 for details.
•
During a call with the handset placed on the base unit (power back-up
mode), the call may be disconnected if you touch the handset. In such a
case, try to call back.
•
The range of the base unit is limited during a power failure. Please use
the handset close to the base.
redial list/phone book
1. Place the handset on the base and press
REDIAL/PAUSE
or (
PHONEBOOK
icon).
2. Press the
UP
or
DOWN
key and select the desired number.
3. Press
TALK/FLASH
to dial out the number.
1. Taking care not to lift the handset from the base, press
TALK/FLASH
(the
speakerphone is turned on automatically). Dial the number.
2. After you finish, press
END
.
