background image

12

using the Caller Id and redial lists

Caller ID (CID) is a service available from your telephone provider that 

shows the phone number (and sometimes the caller’s name) of the 

incoming calls. Contact your telephone provider for more information.

Caller ID list

Redial list

• 

The phone saves the information 

for the last 50 received calls to the 

CID list

. The 

NEW

 icon marks any 

calls received since the last time 

you checked the list.

• 

All handsets share the same CID 

list so only one handset can access 

the list at a time. 

• 

In standby, handsets show how 

many calls came in since the last 

time you checked the CID list.

• 

Each handset remembers 

the last 10 numbers you 

dialed on it. 

• 

Only one handset can 

access its redial list at a time

To...

Press...

open the CID list

CID

.

open the redial list

REDIAL/PAUSE

.

scroll through the lists

DOWN

 to scroll from newest to oldest.

UP

 to scroll from oldest to newest.

dial the highlighted number

TALK/FLASH

or 

SPEAKER.

 

close the lists

PHONEBOOK 

or

 END.

For individual record options, highlight a number and press 

MENU/SELECT

.

Delete Entry

Erase the number from the list.

Store Into PB

Add the number to the phonebook. The 

handset prompts you to edit the name and 

number and select a personal ring

Delete All

Erase all numbers from the list.

Summary of Contents for DECT 3115





























Reviews: