background image

11

usIng your phone

This section explains the most common functions on the phone.

To...

Earpiece

Speaker

make a call, dial the 

number, then

Press 

TALK/FLASH

.

Press 

SPEAKER

.

answer a call

Press 

TALK/FLASH

.

Press 

SPEAKER

.

hang up

Press 

END

 or place the handset in the cradle.

ignore the call (mute 

the ringer)

Press 

MESSAGE/MUTE

 while the phone is ringing.

switch to/from the 

speaker

Press 

SPEAKER

.

 

mute the microphone

Press 

MESSAGE/MUTE

.

Press again to turn the microphone back on.

put a call on hold

Press 

INTCOM/CLEAR

 (after 2 mins 50 secs on hold 

the call will be disconnected).

return to a call on hold Press 

TALK/FLASH

.

Press 

SPEAKER

.

Finding a lost handset

With the phone in standby, press 

FIND HS

 on the base. All handsets beep for 

1 minute; to cancel, press 

FIND HS

 again or press any handset key.

Changing the Volume

Press 

UP

 or 

DOWN

 to increase or decrease the earpiece or speaker volume 

when you are on a call. You can adjust the ringer volume only when the 

phone is in standby.

 

#

turning the ringer volume all the way down turns off the ringer.

switch between upper and lower 

case letters

*

rotate through the punctuation and 

symbols

0.

Summary of Contents for DECT 3115





























Reviews: