background image

headset, too. Transfer the call to your phone and 

see if the audio quality improves. If it doesn’t, 

check around for things that might interfere 

with your phone. 

Safety and Handling Information 

For maximum product life, do not drop, throw, or 

crush the headset. Do not expose it to humidity, 

dust, or temperatures above 125 F.

Cleaning the headset

If necessary, remove the ear cushion and 

earhook. Dampen a lint-free cloth with water 

or a cleaner specially designed for electronics, 

and gently wipe the headset clean. 
Do not expose this product to liquid (water, 

alcohol, etc.) or submerse in liquid for any 

reason.

Avoiding hearing damage

Using any headset or earbud at too high a 

volume can cause permanent hearing damage. 

To reduce the risk of hearing damage:

Set the volume at the minimum level needed 

to hear in the current environment. If possible, 

use your headset in quiet surroundings or try 

to move to an area with less background noise 

before adjusting the volume. 
Start with the volume at its lowest setting, 

then gradually increase it until you can hear.  
Turn the volume down before powering off the 

headset and readjust the volume each time 

you turn it on.
If someone next to you can hear the other end 

of the call through your headset or if your ears 

hurt or ring when you hang up, the volume is 

too high. 
The longer your ears are exposed to noise, the 

greater the risk of damage. Limit calls at higher 

volumes (or other exposure to loud noise). 
For more information on protecting your 

hearing, visit the WISE EARS® website 

(www.nidcd.nih.gov/health/wise/) or consult 

an audiologist.

Summary of Contents for BT-109

















Reviews: