background image

11

The headset can be connected only to devices 

that support the Bluetooth headset or hands-

free profile. This product is not compatible with 

standard cordless phones.

Battery life

With average use, the battery should provide 

about 9 hours of talk time and 8 days of standby 

time. A battery that is new or left unused for 

long periods of time can have reduced capacity 

the first few times it is used. For maximum 

battery life, keep your battery charged.

When the battery only has enough charge for 

about 15 minutes of talk time, the headset 

triggers a low battery alert: you’ll hear a 

periodic beep, and the LED changed from blue 

to red.
When the battery no longer has enough charge 

to operate the headset, the headset will power 

off; you won’t be able to turn it back on until 

you connect the charger or charge the battery.

Noise or Static on the Headset

The most common cause of noise or static on any 

wireless device is interference. Bluetooth devices 

operate in the ISM band (2.402 GHz ~ 2.480 

GHz); any equipment operating in this frequency 

range might interfere with the headset. Some 

common sources of interference in this range are

Equipment that uses microwaves, especially 

microwave ovens
Wireless LAN equipment or WiFi connections
Other Bluetooth devices or computers
Certain cordless telephones
Certain medical equipment and appliances

If you have problems with static during calls, 

look for one of these interference sources. Try 

moving away from the suspected source. 
If the noise continues, there may be interference 

on your phone itself, and any noise in the 

phone’s connection will come through on the 




Summary of Contents for BT-109

















Reviews: