background image

FCC Notice

This device complies with part 15 of the FCC 

rules. Operation is subject to the following 

two conditions: (1) This device may not cause 

harmful interference, and (2) This device must 

accept any interference received, including 

interference that may cause undesired 

operation. Privacy of communications may not 

be ensured when using this product.
To insure the safety of users, the FCC has 

established criteria for the amount of radio 

frequency energy various products may produce 

depending on their intended usage. This product 

has been tested and found to comply with the 

FCC’s exposure criteria. For body worn operation, 

the FCC RF exposure guidelines were also met 

when used with the Uniden accessories supplied 

or designed for this product. Use of other 

accessories may not ensure compliance with FCC 

RF exposure guidelines and should be avoided. 

Industry Canada statement

This device complies with RSS-210 of the 

Industry Canada Rules. Operation is subject to 

the following two conditions: (1) This device 

may not cause harmful interference, and (2) this 

device must accept any interference received, 

including interference that may cause undesired 

operation.

IMPORTANT NOTE: Radiation Exposure 

Statement

This equipment complies with IC radiation 

exposure limits set forth for an uncontrolled 

environment. End users must follow the specific 

operating instructions for satisfying RF exposure 

compliance. To maintain compliance with IC 

RF exposure compliance requirements, please 

follow operation instruction as documented in 

this manual. 

Summary of Contents for BT-109

















Reviews: