83
Programming Your Scanner
Off
— the scanner ignores I-Calls. The default setting is
Off
.
Only
— the scanner only tracks I-calls and ignores other radio traffic on the
system. Press
F
to select.
Note:
You can enter a wildcard that matches all I-calls by programming
[.No]
+
[0]
into one of the channels. When you press
[.No]
the scanner interprets the entry as
a ‘i’ so that the entire entry can be written “i0.”
[MENU]
Program System
F
Select a Motorola Type I, II or EDACS Wide/Narrow system
F
Edit Sys Option
F
Emergency Alert
F
Off
— the scanner does not alert you to emergency transmissions.
Alert 1
-
9
the scanner sounds an alert beep to notify you of the emergency
transmission. The default alert is
Off
. You can choose any of 9 different beep
types. Once you choose an alert tone, next:
Set Level
F
Auto
— the scanner automatically sets the emergency alert beep to the master
volume level.
Level 1
-
15
— the scanner adjusts the volume you hear to the level you select.
Assigning a Conventional System to a State
In addition to the BearTracker System Preprogrammed State information, you may
want to program another system in that same state. Then, when you turn on that
state using the
[STATE]
and the
Scroll Control
, the system you program will also
be enabled and scanned. See “Assigning a Trunked System to A State” after
“Setting Site location Information”
[MENU]
Program System
F
Select an existing Conventional system type
F
Edit Sys Option
F
Set
State
F
Rotate the Scroll Control to the same state as the system’s state.
Setting the Emergency Alert Option
ME
Conventional Systems
C
