User and installation manual
Réf : 004057-02
Page : 3/17
Technical specifications
This control box is compatible with following motors:
AN1244: PL3210, PL1218, DL3010 and DL1318
AN1274: PL6010, PL3218, PL7710, DL6010, DL7710 and DL3018
•
« Pulse mode » or « Hold mode » can be selected independently on both directions (open/close).
•
Overload detection in case of motor slow down during cover operation
•
Security Loop (for emergency stop or alarms coming from sensors)
•
Auxiliary Relay (for electrolyser or pump management)
•
One-digit display for alarm notification and troubleshooting.
FUSES CARACHTERISTICS:
AN1244
F1 = Fuse ATO 10A
F2 = Fuse 5x20 3.15A Time lag
AN1274
F1 = Fuse ATO 15A
F2 = Fuse 5x20 4A Time lag
CHARACTERISTICS
AN1244
AND1274
Unit
Power feed tension
230
230
V AC
Frequency
50
50
Hz
Monophasic AC Network
L/N/PE
L/N/PE
Maximum power
210
360
VA
Zero load tension
30
30
V DC
Maximum load current
10
15
A
Dimension (HxLxP)
291x241x87 291x241x88
mm
Weight
3,5
4,7
kg
Waterproof class
IP50
IP50
Operation temperature range
0 to 50
de 0 to 50
°C
Admissible humidity
0 to 85
de 0 to 85
%