Operation
HT-Series | Version 1.01
13
Fig. 6: Disassembly of the swivel device
Step 4: Slightly loosen the fastening screws of the swivel
device at the front and rear of the lifting table,
swivel the swivel device upwards and pull it
upwards out of the fastening screws.
Step 3: Move the swivel device to the side.
Now the lift table with the suitable platform can be used
as a lift table.
The platform swivel device is reassembled in the re-
verse sequence to the disassembly described above.
9
Operation
CAUTION!
Before operating the lift table, the operator must
ensure that there is no danger from the movement of
the lift platform.
DANGER!
DANGER TO LIFE DUE TO FALLING OF THE
LOAD!
Falling loads can cause serious injury or death. .
- Never exceed the specified maximum load.
- Never move the lifted load.
- Never work under the lifted load.
- Observe the load manufacturer's instructions on
the load application point.
- Distribute the weight centrally on the table of the lift
table
- Only lift loads with the lift table on a horizontal, level
and firm surface.
- Do not lift any persons individually or together with
the load.
- When leaving the workplace, lower the load if it is
not additionally mechanically secured.
Use protective gloves!
Wear safety boots!
Wear protective clothes!
Summary of Contents for HT 300 S
Page 26: ...www unicraft de ...
