4
D5510FCA
All Rights Reserved
©2013 Escalade Sports
For Customer Service Call 1-800-526-0451
UNPACKING THE GAME
Unpack your new dartboard carefully, making sure all parts are included. The following
components are included in this set:
1 Electronic Dartboard
6 Darts (unassembled)
Soft tip replacement pack
Owner‟s Manual
MOUNTING INSTRUCTION
Choose a location to hang the dartboard where there is about 10 feet of open space in front
of the board
. The “toe-line” should be 7‟ 9-1/4” from the face of the dartboard.
Locate a wall stud and place a mark 75-1/2
” from the floor. This mark is for the top screw
hole. For the bottom two screws, you will measure down 12-
3/8” from the top mark you just
made and make a temporary reference mark. (Do not drill a hole for the temporary reference
mark)
You will need to place a mark 5-
3/8” to the left of that reference mark point for the bottom left
screw hole and then make another mark 5-
3/8” to the right of the original reference mark for
your bottom right screw hole. Insert mounting screws in the center of the marks you made.
(Do not drill into the TEMPORARY REFERENCE MARK)
Mount the dartboard on the wall by lining up the holes on the back with the screws. It may be
necessary to adjust the screws until the board fits snugly against the wall.
Center of Bullseye should be
5‟ 8” from the floor when finshed.
Bottom
Screw
63-1/8
”
Top Screw
75-1/2
”
5
’8” from Floor to
Center of Bullseye
