5
D5510FCA
All Rights Reserved
©2013 Escalade Sports
For Customer Service Call 1-800-526-0451
DARTBOARD FUNCTIONS
BUTTONS FUNCTION
POWER
button - Press to turn game on or off. Dartboard has an automatic suspend mode to
conserve power and battery life.
PLAYER
button - This button is used at the start of each game to select the number of players
you want to play the game. In addition, this button allows players to see other player scores of
not on active display. This dartboard keeps track of up to 4 player scoring or 4 two-person
teams. When playing with more than 2 players, some scores will be not be visible when not
active. This button allows you to page through all players
‟ scores as needed.
VIRTUAL OPPONENT
button - This button is used at the start Virtual Opponent mode. In this
mode, player will play against computer.
START
button - This multi-function button is used to:
START the game when all options have been selected.
CHANGE to the next player when one player is finished with his round. This will put
dartboard in HOLD status between rounds to allow player to remove darts from the target
area.
GAME
buttons - Press to page through the on-screen game menu.
DOUBLE
- This button is used to activate the Double In/Double Out option for games which
has Special Functions and only active on these games.
DISPLAY PROTECTIVE FILM
This electronic dartboard may have a clear film over the entire display area to prevent
scratching during shipping. It is recommended that this film be removed before play to
enhance the display area visibility. To remove, simply lift edge, peel off, and discard.
ELECTRONIC DARTBOARD OPERATION
1.
Press the
POWER
button to activate dartboard. A short musical introduction is played as
the display goes through power-up test.
Press GAME buttons until desired game is displayed.
2.
Press
PLAYER
button to select the number of players (1, 2, 3, 4, t 1-1, t 2-2,
t 3-3, t 4-4).
The default setting is 2 players.
3.
Press
START
button to activate game and begin play.
4.
Throw darts
The dart indicator display is located to the right of the score display. The number of
darts displayed indicate the remaining throws for the active p
layer.
When all 3 darts have been thrown
, a voice command will indicate “next player” and
the score will flash. The darts can now be removed without affecting the electronic
scoring. When all darts are removed from the
playing surface press the START
button to go to next player. Voice command will indicate which player is up.
