Luxe Cabinet
Instruction
Setup instructions
1.
Place the Exclusive Board on a table with the top facing down. Please place a clean blanket
under it in order to avoid scratches to the wooden board.
2.
Place this instruction on the underside of the board so that the instruction covers the
complete board evenly.
3.
Locate the four self-adhesive plastic foam mounts on the cut out areas.
4.
Rotate the board and press it on the table so that the plastic foam mounts are evenly
secured.
5.
Now place the board on the Luxus Cabinet, adjust it so that the plastic foam mounts sit in the
centre of the counterparts.
IMPORTANT: The board is now fixed laterally but can be removed at any time. If you wish to
transport the system, please remove the board beforehand.
Compatibility & operation
The Millennium Luxus Cabinet is provided for the operation of the following components:
1.
Millennium Exclusive chessboard
2.
Millennium M825 ChessVolt
3.
Millennium M822 ChessLink
With this, the Exclusive Board becomes a full-featured E-board, which you can operate independent
of the mains.
Using the outside switch you can switch the above-named components ON or OFF externally. The
switch is illuminated as soon as the light is on the components are switched ON.
Note:
-
See to it that the main switch of the ChessLink always remains ON.
-
You absolutely require a ChessVolt in order to be able to use the electrical components of
the system.
If you wish to connect the system to a chess computer module of type M823 or M820 proceed as
follows:
1.
Remove both connection cables (3 and 4) of the ChessLink in the drawer.
2.
Lead power cable 3 out of the drawer and connect this to the chess computer module
3.
Connect the chess computer module with the board as normal.
Now you can use the chess computer with the board as usual.
