Installation
★ Machine installation should onl y be
carried out by a qual ified technician.
★ Conta ct your Unicorn dealer or a
qualified electricia n for any electrical
work that may need to be done.
★ The sewing machine weighs more than
33 kg.
The insta llation should be carried out by
two or more people.
★ The top of the table should be 40 mm
in thickness a nd should be strong
enough to hold the weight and
withstand of the sewing machine.
★ Do not connect the power cord until
installation is complete. otherwise the
machine may opera te if the treadle is
depressed by mistake, which could
★ Be sure to connect the ground. If the
ground connection is not secure, you
run the risk of receiving a serious
el ectric shock.
★ Ref er to the instruction manual for
motor for details on install ing and
using the motor.
★ All cords should be secured at least
25 mm away from any moving parts.
Furthermore. do not excessively bend
the cable or secure it too firmly staples,
otherwise shocks could occur
★ install the belt covers to the machine
head and motor.
★ Be sure to wear protective goggles and
gloves when handling the lubricating oil
a nd grease, so that they do not get
into your eyes or onto your skin,
otherwise inflammation can result.
Furthermore, do not drink the oil or eat
the grease under any circumstances,
a s they can cause vomiting and
diarrhoea.
Keep the oil out of the reach of
children.
★ Avoid setting up sewing machine near
sources o strong el ectrical noise such
as high-frequency welding equipment.
If this precaution is not taken,
incorrect machine operation may result.
Sewing
★ This sewing machine should only be
used by operators who have received
The necessary training in saf e use
before hand.
★ The sewing machine should not be use
f or a ny applications other than sewing.
★ Do not touch any of the moving parts
or press any objects against the
machine while sewing. as this may
result in personal inj ury or damage to
the m achine.
★ Wait at least 5 minutes after turning off the power switch and disconnecting
the power cord from the wall outlet before opening the face plate of the control box.
Touching areas where high voltages art present can result in severe injury.
ꍾ
Notes on safety
Summary of Contents for LS2-H520
