28
The ENDAT-3201M Embedded CPU Board
3-7. PCI / Plug and Play Setup
This section describes the configuration of the PCI bus system. PCI is a system that allows
I/O device to operate at speeds nearing the speed of the CPU itself, when communicating
with its own special components. This section covers some very technical items. It is strongly
recommended that only experienced users make any changes to the default settings.
PCI / Plug and Play Setup
Plug and Play Aware O/S
No
OnChip VGA Frame Buffer Size
8MB
PCI Latency Timer (PCI Clocks)
32
Primary Graphics Adapter
PCI
Display Device
CRT Only
LCD Resolution
640 x 480
DMA Channel 0
PnP
DMA Channel 1
PnP
DMA Channel 3
PnP
DMA Channel 5
PnP
DMA Channel 6
PnP
DMA Channel 7
PnP
IRQ3
ISA/EISA
IRQ4
ISA/EISA
IRQ5
PCI/PnP
IRQ7
ISA/EISA
IRQ9
PCI/PnP
IRQ10
PCI/PnP
IRQ11
PCI/PnP
IRQ14
PCI/PnP
IRQ15
PCI/PnP
Plug and Play Aware O/S
Set this option to
Yes
to inform AMIBIOS that the operating system can handle plug
and Play (PnP) devices. The settings are
No
or
Yes.
The Optimal and Fail-Safe
default settings are
No.
Summary of Contents for ENDAT-3201M
