User’s Manual
23
3-5.
Peripheral Setup
Peripheral Setup
OnBoard FDC
Enabled
OnBoard Serial Port 1
3F8/COM1
OnBoard Serial Port 2
2F8/COM2
OnBoard Parallel Port
378
Parallel Port Mode
ECP
EPP Version
N/A
Parallel Port DMA Channel
3
Parallel Port IRQ
7
OnBoard Serial Port 3
3E8/COM3
Serial Port3 IRQ
9
OnBoard Serial Port 4
2E8/COM4
Serial Port4 IRQ
10
OnBoard Parallel Port 2
Disabled
Parallel Port Mode
Normal
EPP Version
N/A
Parallel Port DMA Channel
N/A
Parallel Port IRQ
5
OnBoard AC'97 Audio
Enabled
OnBoard Legacy Audio
Enabled
Sound Blaster
Enabled
SB I/O Base Address
220h-22Fh
SB IRQ Select
5
SB DMA Select
1
MPU-401
Enabled
MPU-401 I/O Address
330h-333h
Game Port (200h-207h)
Enabled
Onboard FDC
Set this option to “Enabled” to enable the floppy drive controller on the
motherboard. The settings are Auto (AMIBIOS automatically determines if the
floppy controller should be Enabled, or Disabled).
Summary of Contents for ENDAT-3201M
