20
The ENDAT-3201M Embedded CPU Board
Password Check
This option enables password checking every time the system boots or when you
run AMIBIOS Setup. If
Always
is chosen, a user password prompt appears every
time the computer is turned on. If
Setup
is chosen, the password prompt appears if
AMIBIOS is executed. See the Advanced Setup chapter for instructions on
changing a password.
Boot To OS/2
Set this option to “
Enabled”
if running OS/2 operating system and using more than
64 MB of system memory on the motherboard. The settings are “
Enabled”
or
“
Disabled”
.
System BIOS Cacheable
When set to “
Enabled”,
the contents of the F0000h system memory segment can be
read from or written to cache memory. The contents of this memory segment are
always copied from the BIOS ROM to system RAM for faster execution. The
settings are “
Enabled”
or “
Disabled”.
Summary of Contents for ENDAT-3201M
